A Complete Guide To Refinishing Hardwood Flooring

Hardwood flooring looks amazing in most homes. It can last for many years if properly maintained. However, hardwood flooring can become dull and damaged from wear and tear as it ages. A beautiful floor can become dull over time. This is especially true if it receives a lot of foot traffic or any pets running around frequently. You can restore their former glory by simply refinishing it.

What Is Involved In Refinishing Hardwood Floors?

Refinishing hardwood stairs or floors involves removing the existing layer of the finished product. This is usually done using a sanding instrument to get to the bare wood. The next step would be applying another coat to your floors to protect and enhance their appearance.

Even if your wood floor does not have a finishing coat applied, it still must first be sanded completely. It is not possible to spray on a finishing product. If most of the finish is intact and there are only a few small, non-pervasive scratches, it might be possible to re-coat the product rather than refinish.

What Are The Levels Of Hardwood Floor Refinishing?:

Refinishing hardwood floors can be done in two ways. The simplest and easiest way is buffing. If scratches or wear are not severe and the wood underneath is in good condition, restoring the topcoat via buffing is possible.

Refinishing and sanding hardwood floors can help to restore the entire damaged flooring. You can also change the color of hardwood flooring with a stain.

After sanding the wood to its bare timber, fill in any cracks with wood filler that matches your wood’s color. Let the stain dry completely before applying the finish.

What Are The Different Types Of Hardwood Floors Finishes Available?:

The three most popular types of wood floor finishing are water-based, polyurethane, and acid-cured. While water-based coatings can be more affordable, they are less durable. Polyurethane is the most popular and most versatile. Acid-cured finishes are extremely durable but are often difficult to apply. You can find the full list here of all the equipment you need to have before refinishing the hardwood floors.

Step-by-step Instructions For Refinishing Hardwood Floors
➤ Clear the space of any furniture. Before you start, make sure that the floor is clear of all obstructions.
➤ Make sure you have all the tools and equipment necessary.
➤ After you start sanding, keep moving the sander. If it sits in one place for too long, it can cause uneven surfaces.
➤ Spend a few hours cleaning up the room after you have finished sanding. This will ensure that there is no trace of dirt, dust, or other unpleasantness. You can use your vacuum cleaner, brooms, and dustpans to complete the task.
➤ You can refinish your floors in many colors and styles.
➤Now you can begin the process of refinishing hardwood floors.
➤ After it has dried completely (approximately eight hours, give-or-take), apply another coat to your hardwood floors. Typically, they need at least two coats to look good.

Pin It on Pinterest